SPECIFICATIONS

DACKOR designs are easy to specify and source surfaces due to our communication and robust inventory. Most info needed for specification is located on this single page with bullet points and downloadable files

CusCompany: DACKOR®
Specifying hardwoods or exotic woods can lead to deforestation. Not only does this deplete the amount of CO2 absorbing trees but many rainforests are treasure troves for exotic animal species and plants. These rainforest plants can often contain vital information for creating new cures and medicines. DACKOR is a manufacturer and supplier of smart laminates that are ideal for vertical / indoor applications such as cabinet doors, store fixtures, interior fire doors and walls.

Product Spec Overview:   DACKOR® 3D Laminates
Why: Dackor brand 3D Laminates form on all 3 dimensions of a products surface alleviating the need for edge-banding. This creates seamless, monolithic components made such as cabinet doors, drawer fronts and store fixture parts using DACKOR have 95% of the weight as recycled content by utilizing high grade Medium Density Fiberboard (MDF) as the component’s core. MDF uses recycled wood chips and compresses them with water based adhesives to form a surface which will not warp and is easy to mill on the CNC and will hold a screw as compared to particleboard which cannot typically.
Sizes: 56 to 57" wide with film thicknesses ranging from 0.3mm thick to 0.7mm thick.
Ideal Applications: Multi family and hotel cabinet doors, cabinet drawers, chain store fixture parts, restaurant walls, office desk tops, RV kitchen tops
Not for: Residential Tops using stove tops, educational desk tops in schools, exterior use
Availability: 200 colors+ stocked to handle jobs as small as 1 unit and as large as 300 units that ships same day to domestic manufacturers
Data Files (click to open): Fire Test , HPL vs 3DL , Instructions for Cleaning, MSDS, Info Booklet with cross reference, LGA Test, Healthcare Cleaning Agent Use Test, Paint Ready Laminate, SDS HPL Back Sheets, Specification Guide, VOC Test Report, or visit the product page

Product Spec Overview:       PEELSTIX® and PEELSTIX WRAP
Why: PEELSTIX® brand 3D Laminates are made in the USA and have pressure sensitive adhesive on the back that can adhere to metal, wood, foam, plastic, pvc and other non porous surfaces. The product's key attribute is its ease of application with no need to wrap or to apply glue. The product comes ready to install and simply cut with a utility knife to transform any surface quickly. For locations like fire doors you simply paint the sides of the door so there is no need to wrap. Our PEELSTIX WRAP product is for wrapping surfaces.
Sizes: 54" wide and it adds 5 mil (0.125mm thickness of glue) to our 12, 16, 20 or 28 mil 3D Laminates. PEELSTIX WRAP is 0.15mm to 0.2mm thick with a 2 mil glue
Ideal Applications: Interior flat surfaces or columns. Ideal for fire doors, cabinet boxes when cabinet refacing and other flat surfaces for PEELSTIX. PEELSTIX WRAP can wrap edges.
Not for: Exterior, Wrapping unless using the PEELSTIX® Wrap grade.
Availability: We custom produce in 3 to 5 business days in the sizes of 3, 10, 15 and 30 yard roll lengths
Data Files (click to open): Fire Test ,  Instructions for Cleaning,   LGA Test,   Installation Instructions basic, Cabinet Refacing Guide, VOC Test Report, Technical Data Sheet, or visit the product page

Product Spec Overview:      KOR ACCENT PLANKS and KOR ACCENT PLANKS XL
Why: Accent Planks by DACKOR is an extension of the Peelstix brand by application of a peel and stick back to our surfaces but built thicker with a core so as to make the finished product more rigid yet light weight. This enables the product to be applied to walls with no wrinkles or issues. Much like Peelstix, Accent Planks can be cut with a simple utility knife as a score and then popped to break apart. This enables installation to be quiet, clean and even easier to install due to the products rigid structure. Accent Planks make use of the vibrant color range with deep embossing that creates a luxurious look. Accent Planks may also have routered edges which enable you to see the core of the product after installed creating a grout look.
Sizes: ACCENT PLANKS are 5 7/8" x 48" long ACCENT PLANKS XL are 24x24" tiles, 24"x 48" planks and 48"x48" panels. The XL enable a more substantial high end look due to the products size yet still light weight.
Ideal Applications: Commercial and Residential applications. Can be used for doors and headboards but primarily used for Accent Walls.
Not for: Exterior or columns
Availability: Stocked in a few dozen colors for same day shipping. Custom colors and sizes available
Data Files (click to open): Fire Test ,  Instructions for Cleaning,   LGA Test,   VOC Test Report, Peelstix Technical Data Sheet, or visit the product page

Product Spec Overview:     NATURA Wood and NATURA Stone
Why: Although DACKOR is focused on the production of laminate products due to customer demands we produce Accent Planks which are made by natural Stone and Wood. NATURA brand Accent Planks are made of real reclaimed wood and thin cut stone then peel and stick backed for ease of install
Sizes: Various sizes.
Ideal Applications: For Residential and Commercial Applications in which natural products are specifiable.
Not for: Areas that require the impact resistance and class A fire rating of Dackor and KOR Laminates.
Availability: Stocked in a few dozen colors for same day shipping. Custom colors and sizes available
Data Files (click to open): None at this time

Reduction of Shipping:
Specifying DACKOR also reduces in total energy consumption caused by material movement. The total energy used to transport our light surfaces are much less than when compared to importing logs or shipping hard wood nationally. All finished products produced by our customers utilize local MDF substrate mills to produce your finished product close to your project. Components and Furniture made by our 3D Laminates are typically produced close to the project by our manufacturing customers using CNCs and Membrane pressing. Wall products are made by Dackor

Green Production:
In addition to 3D Laminates being a green product, DACKOR also exceeds environmental requirements. We are ISO 9001 and ISO 14001 certified.

LEED Credits:
Kitchens produced using DACKOR brand 3D Laminates qualify for up to 5 LEED Points. Architects and Cabinet producers can contact us for guidance to obtain the maximum points.